Huaian Bolong Waterproof Materials Co., Ltd.

1. Product Introduction
Bolong waterproof coating series are high-efficiency waterproof materials designed for different substrates. They are cement-based waterproof coatings modified by acrylic high polymers. This product is matched with dry powder (r) and liquid additive (rB). After mixing, a chemical reaction occurs to form a tough elastic waterproof layer. This layer has good adhesion to the base surface and can form a tight, firm and permanent It can inhibit the growth of mold and prevent salt pollution.
2. Main features
It can be constructed on wet base surfaces, and the waterproof layer has high mechanical strength and good wear resistance.
The coating can prevent moisture and salt pollution and inhibit the growth of mold.
The concrete can still remain breathable. Since this product is cement-based, ceramic tiles, mosaics, etc. can be directly laid on the waterproof layer.
This product has two appearances: white and gray.
3. Scope of application:
Used for indoor and outdoor cement concrete building structures, prefabricated concrete structures, cement plasters and brick walls and other base surfaces.
, underground parking lanes, underground tunnels, water supply and drainage pipes, floor walls and floors.
This product is non-toxic and harmless and can be directly used in drinking water reservoirs, swimming pools, fish ponds, etc.
This product is also suitable for various waterproofing projects on the front or back water surface.
4. Construction requirements:
The base must be clean, solid, flat, dry, ash-free, and sand-free.
Pour the liquid into the prepared container in proportion, then add the powder into the liquid in proportion and stir thoroughly until the liquid and powder are dissolved.
Use a roller, shotcrete machine or brush to evenly roll or spray the mixed slurry onto the cement base surface. The thickness of the coating should be applied according to the design requirements.
The order of coating is to apply the first coat and then the second coat. After the coating is dry, apply the third coat in the direction perpendicular to the angle, and so on.
It is forbidden to step on it within hours after the construction is completed. After it is completely dry, other covering layers (such as plastering, tiling, mosaics, etc.) can be applied.
5. Technical indicators: Implementation standards/
Serial number Type of inspection items
Tensile strength.
Elongation at break
Water impermeability, water impermeability, water impermeability
Drying schedule Drying time
6. Packaging Storage and transportation:
Liquid materials must be stored in a cool place above ℃, and powder materials should be stored in a dry place. Pay attention to moisture, sun, and rain. The shelf life of this product is one year.
The liquid product is packed in plastic barrels, and the powder is packed in plastic-lined bags.
This product is a set (kg of powder + kg of liquid).
7. Reference dosage and proportion:
/> When the thickness of the waterproof layer is .㎜, the dosage is about .㎏/㎡ (total amount of powder + liquid) mixing ratio㎏: .㎏
Storage method: Store in a cool and dry place, unopened products can be stored for one day Year.
Packaging specifications (two components):
Type: powder + additive (large component) powder + additive (medium component) powder + additive (small component)
Type: powder + additive (large component) powder + additive (medium component) powder + additive (small component)